How to use the cleaning filament?

This filament can be used to clean the printers print core by applying hot and cold pulls. Hot pulls are used to get the biggest parts of carbonized material out of the print core and are highly

recommended when the print core is clogged. With a cold pull, the remaining small particles will be removed, ensuring the print core is completely clean. Load the cleaning filament as usual into your 3D printer until the old filament is displaced and filament emerges from the nozzle. Adjust the extruder so that it remains hot. Use the "Preheat" or "Control” “→Temperature" option and set the temperature to 200-230°C and let it simmer for 5 minutes.

Afterwards, extrude a few centimeters of filament and let the whole stand again with a hot extruder.

Repeat the procedure again.

Now remove the 3D cleaning Filament and load the filament with which you want to print until the cleaning filament is completely displaced.